2000 01 25 /Rev.A
13
User Manual
Transceiver U922
TD 91836GB
Operation and Maintenance
Operation Modes
The transceiver operates in one of six modes. The user moves between the differ-
ent menu modes by using the STEP and OK buttons.
•
OFF
In this mode the transceiver is turned off and all functions are deactivated
except for the built-in clock.
•
NORMAL
This is the normal operation mode where all functions can be active.
The transceiver can transmit alarms and receive, indicate, and store pagings.
The transceiver always enters this mode when it is turned on.
•
CHARGE
The transceiver automatically enters this operation mode when it is placed in a
charging rack. Depending on how the function parameters are set in the
transceiver, it either can receive pagings or be turned off.
•
CHANGE
Here the user can change all changeable settings.
•
TEST (not included in default programming)
Used only to test the transceiver's functions in production and service. All
functions are turned off except for those that are specifically being tested. Test
mode is entered by a long press (>2 sec) on the STEP button while the pocket
unit is in (NORMAL) initial start-up, i.e. while the transceiver's identity appears
in the display.
•
PROGRAMMING
The transceiver is set into this mode before parameter programming via radio.
In this mode, no other functions are active. After a preset time the transceiver
automatically leaves the PROGRAMMING mode and enters NORMAL mode.
Display Menu
The display menu is your aid when you set your personal parameters. It is possible
to change a number of settings in the pocket unit. To change a user parameter,
enter the main menu by pressing the OK button. Each selection possibility is listed
by the parameter name, normally followed by the text “CHANGE“ at the lower
right portion of the display.
The OK button is also used to change operation mode from “CHANGE“ to “PRO-
GRAM“ or “OFF“. Each selection possibility is listed by the operation mode name
followed by the text “ACCEPT“ at the lower right portion of the display.
The following flow charts illustrate how the user moves between the different
menu options:
Summary of Contents for U922
Page 22: ...User Manual Transceiver U922 ...
