TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
58
10.2 Protocol – Selection of Protocol
1
Select TEL > Protocol.
Figure 52. Selection of protocol
2
Select/Enter the following settings
3
Click “OK”.
10.3 Interop – Interoperability with Other Equipment
These settings are used to work-around non-standard behaviour of other equipment and
usually nothing should be configured here.
1
Select TEL > Interop.
Figure 53. Interoperability with other equipment
Figure 60.
Field name
Description
• Protocol
• Mode
“Point to Point” switches on the point-to-point mode.
“Point to Multipoint” switches on the point-to-
multipoint mode.
Figure 61.
