Using Supplementary Features for More Efficiency
20
20321618en_ba_a0
Intruding on an Internal Subscriber
You want to talk to an internal subscriber. However, the person is busy.
As a result of your call waiting, the person hears a call waiting tone and your phone number or name
appears on his display. The person can either answer or reject your call.
Initiating an Announcement
You want to address internal subscribers directly via their loudspeaker, if available, without waiting for a
reply (like an an intercom system).
You can initiate an announcement to the selected subscribers, provided your system administrator has
enabled your phone accordingly.
Receiving an Announcement
After an attention tone you will be addressed via your loudspeaker.
You can listen to the announcement or stop it.
Call waiting
Press the "Call waiting" Foxkey.
You hear the dialling tone.
Note
If the person rejects your call request or if call waiting is not possible, the call
is disconnected (busy tone).
Enter the phone number of the subscriber or group.
Press the Menu key repeatedly until the display shows "Announcement".
Announcement
Press the "Announcement" Foxkey.
Pick up the handset.
The person hears the acknowledgement tone. The display shows "Announcement to: ...".
You can now talk.
To continue the announcemnt as a phone call: Pick up the handset.
You are now connected to the person who initiated the announcement.
Note
All the other recipients of the announcement are excluded.
– or –
To stop the announcement: Press the END key.
☛
MENU
END
