manualshive.com logo in svg

ASCOM Myco 2, User Manual

Share
Download
ASCOM Myco 2 User Manual Download Page 32

TD 93066EN

User Manual
Ascom Myco Smartphone

4.  Basics

24

14 May 2018 / Ver. K

The table below shows the charging time when using the different ways of charging.

4.11.1

Charge the Handset in a Charging Rack

TIP: The handset can be configured to clear all existing messages and alerts, mute the 

loudspeaker, or to automatically log out the user when placed in a Charging Rack, refer to the 

Configuration Manual, Ascom Myco Smartphone

.

1 Place the handset in a Charging Rack slot. The charging screen appears as soon as the 

handset is correctly inserted, and shows the current charge level, refer to 

4.11.4 Charging 

Indication 

on page 25.

2 Allow the handset to charge fully. It takes approximately 3.5 hours with a fully depleted 

battery.

The handset is fully charged, and ready to use, when the charging screen shows 100%, and 

the top LED light is fixed green.

TIP: We recommend to always charge the battery fully to extend the battery life, although no 

harm is made to the handset, if removed from the Charging Rack before the battery has 

been 100% recharged.

3 To remove it from the Charging Rack, lean the handset forward slightly and pull.

4.11.2

Charge the Battery in a Battery Charging Rack

TIP: For instructions on how to remove and insert the handset battery, see 

4.12 Change the 

Battery 

on page 26.

1 Place the Battery Pack in one of the Battery Charging Rack slots. 
2 Slide the battery lock to the left. 

The LED light under the slot turns red when the battery is correctly inserted.

3 Allow the battery to charge fully. It takes approximately three hours with a fully depleted 

battery.

The handset is fully charged, and ready to use, when the charging screen shows 100%, and 

the top LED light is fixed green.

TIP: We recommend to always charge the battery fully to extend the battery life. Although, 

there is no harm made to the battery if removed from the Battery Charging Rack before it is 

charged completely, that is, when the LED light beneath the slot still shows red.

4 Slide the battery lock to the right. 

Charging Type:

Charging Time (fully depleted handset):

Battery Charging Rack:

Approx. 3 hours

Handset Charging Rack:

Approx. 3.5 hours

Micro USB cable with recommended 

Power supply unit in a wall socket:

Approx. 4.5 hours

Micro USB cable in a switched on PC: Approx. 4.5 hours

NOTE:  If the handset is switched off when it is placed in the charging rack, it will 

automatically switch on in charger mode once the battery level has reached 

a sufficient level

a

a.This only applies to Ascom Myco 2, whereas the previous model will not automatically switch on 

in charger mode.

Summary of Contents for Myco 2

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands