ASCOM Eurit 4000 Operating Instructions Manual Download Page 76

Page: 76 / 104

20324744en_ba_a0

The memories for incoming, outgoing and archived messages are user-dependent.

In addition to text messages, you can also leave voice messages for other users. Such
voice messages are called

info messages

➭

SMS is not supported by every provider. Ask your provider about the introduction

of SMS.

➭

If your Ascom Eurit 4000 is connected to a telecommunications system, SMS may not

work.

➭

SMS messaging is subject to cost.

Sending messages

From the "Messages/New message/Send SMS (or) Send UUS" menu:

Receiver

Enter the phone number of the person to whom you wish to send a message.

Message

Type the message in the text field.

Send

Press the Fox key below

Send

Sent messages are contained in the

memory for sent messages

, i.e. in the "Messages/

Filing cabinet/Messages out" menu:

delete

To delete a message, select it and press the Fox key below

delete

. The message

is deleted.

read

To read a message again, select it and press the Fox key below

read

(or press

the OK key).

Summary of Contents for Eurit 4000









































































































Search results

Summary of Contents for Eurit 4000

Reviews:

Related manuals for Eurit 4000

Brands by name

Popular brands

ASCOM Eurit 4000, Operating Instructions Manual

Search results

Summary of Contents for Eurit 4000

Reviews:

Related manuals for Eurit 4000

Brands by name

Popular brands