20
Deleting the call charge total
Press the MENU key as often as required until
“Functions” is displayed. Press the Foxkey repeatedly
under
until “Charge Total” is displayed.
Press the Foxkey under “change”.
Press the Foxkey under “del” and then “ok” to set the
amount to 0.
Please note that for technical reasons the displayed call charges may differ from the
amount invoiced by your telecoms company. The amount shown on your bill is binding.
Alarm (reminder call)
An acoustic signal sounds at the preprogrammed alarm time.
Press the MENU key as often as required until
“Functions” is displayed. Press the Foxkey under
repeatedly until “Alarm” is displayed.
Press the Foxkey under “change”.
Enter the desired alarm time. Select “once” or “daily”.
Press the Foxkey under “ok” to activate the alarm.
In idle mode, the alarm symbol is displayed.
When the alarm sounds, it can be switched off using the Foxkey under “ok”.
Do Not Disturb
When this function is active, your telephone automatically rejects all incoming calls until the
programmed time. All incoming calls are registered in the list of callers.
Press the MENU key as often as required until
“Functions” is displayed. Press the Foxkey under
until
“D.n.dist.” (Do not disturb) is displayed.
Press the Foxkey under “change”.
Enter the desired time.
Press the Foxkey under “on” and then “ok” to activate
the function.
“Do not disturb” is displayed in idle mode.
Programming your telephone
Functions
Functions
12:42
change
Alarm: off
ok
del
Charges: DM 0.00
change
Charges: DM 10.40
14:25
ok
once
daily
Alarm: off
Functions
12:00
change
D.n.dist.: off
09:42
ok
on
D.n.dist.: off
ETK30_6.PM6
19.03.97, 17:31
20
