TD 92333GB
2007-02-07/ Ver. D
User Manual
9d24 Mkll Cordless Telephone
44
Rename a system
1
Enter the menu
and press Navigation key or to select the Settings tab
.
2
Press the Navigation key
to enter “Settings”. Press Navigation key
, step to
“System” and press Navigation key .
3
Select “Register” and press Navigation key . The PBX system you are logged on to
is marked.
4
Select "Name". Press "C" to remove the current name. Enter a new name.
9.2
Adjustment of Audio Parameters
The handset is delivered with a set of audio parameters with standard settings for best
audio quality. In some environments, for example one with a high noise level, these
standard values might have to be adjusted to get good audio quality. There are different
SIM card parameters for audio parameters for normal conversation and when
loudspeaking function or headset is used.
In order to achieve optimal audio quality with the different headset types it is
recommended that the SIM parameter called “Headset type” is altered to match the
headset type being used. The default setting for this parameter is microphone on a boom
i.e. the audio is optimized for using a headset with microphone on a boom.
9.3
DECT Location Feature
The 9d24 MkII Protector can be equipped with the DECT Location feature that gives
location information when an alarm is sent. A setting in the SIM card activates location.
There is also a separate parameter that activates “Special location”, i.e. an alarm is sent
every time the handset gets a location from a Location Device with “Immediate Alarm
Transmission” enabled.
There are three options to indicate that the handset is within the range of a location
device:
• The display lights up.
• The LED lights up.
• A beep.
The 9d24 MkII EX-Protector is equipped with the DECT Location feature by default.
9.3.1
Location Test
When a DECT Location system is installed, a handset with this feature has to be used for
location test.
1
To activate the location test mode, select the Settings tab
and press
Navigation key
to enter settings.
2
Step to “System” and press Navigation key .
3
Select “Location test” and press Navigation key .
4
Press “Ok” to activate the location test. To deactivate the location test, press “Ok”
again.
