TD 92333GB
2007-02-07/ Ver. D
User Manual
9d24 Mkll Cordless Telephone
17
Delete the received message
Press the Soft key “Delete” when the message is viewed on the display or marked in the
Message list. The question “Delete message?” is shown; press “Yes”.
4.3
Message queuing and message priority
This function is default set to On, i.e. SIM parameter "Time to read" set to 20 seconds. To
turn the function Off set the "Time to read" parameter to 0.
If several messages are received during a short period of time it is possible to set, with the
SIM parameter "Time to read", at which rate the messages will be shown on the display.
"Time to read" is the minimum time each message will be shown on the display without
being interrupted by another message, except if the new message is of higher priority.
Messages that are not shown yet are placed in a queue. The priority and time of
reception determine the position in the queue.
There are 9 levels of the priority. 1 is highest priority and 9 is lowest priority. If several of
the messages have the same priority the message that was received first is shown first.
The total number of messages in the queue and the message list can not exceed the total
number of characters stored, see
4.1 Message List
above.
