12 |
p a g e
Deadzones need to be adjusted so that a resting paddle has 0% output whereas a fully pulled paddle
results in 100% output.
The
position indicator
shows the resulting output which is reported to the simulation. Raw value is the
absolute, unaltered value of the paddle.
Deadzone low defines the Raw value at which the output starts (0%).
Set this value about 1% - 2%
higher
than the Raw value of the resting paddle.
Deadzone high defines the Raw value at which the output ends (100%).
Set this value about 1% - 2%
lower
than the Raw value of the fully pulled paddle.
Realistic values are as follows:
The last step is to define the previously configured wheel axis as a Simucube 2 axis:
If the axis doesn’t show up correctly in this tab or the overview tab, make a full power cycle of both
the wheel base and wireless steering wheel.
5
6
