AT5000 1310 nm F3ST Optical Transmitter
Solutions Provider for FTTx, RFoG, and HFC
www.ascentcomtec.com
Page 9 of 26
On receiving your new AT51-F3ST, you should carefully unpack and examine the contents for
loss or damage that may have occurred during shipping. Refer to warranty registration if loss
or damage has occurred. The AT51-F3ST should consist of the following:
Qty
Description
1
AT51-F3ST unit
1
1
Key for switching laser ON / OFF
Test report
1
Power supply cord
1
Product User Manual (Optional)
Keep all AT51-F3ST packing boxes and packaging for future transport.
Use only the original AT51-F3ST packaging when transporting. This packaging has been
specifically designed to protect the equipment.
The AT51-F3ST requires a mains input of 90 V
AC
to 265 V
AC
at 50 to 60 Hz. The unit will
automatically adjust the power conversion for inputs within these ranges, with no switch
setting or other user intervention. Power consumption of the unit is 50 W maximum.
The transmitter is designed to operate with an ambient temperature of -5 °C to +65 °C with
humidity up to 95 %. Free ambient air should be maintained around all sides of the unit. Care
should be taken to ensure that the air flow around the unit is unrestricted.
The AT51-F3ST should have a minimum ventilation clearance of 1 RU above and below the
transmitter.
Warning
DO NOT expose AT51-F3ST to conditions which would permit condensation to form on
the inside of the transmitter.
DO NOT operate AT51-F3ST outdoors.
powered by
