AP214H GPON HGU ONT
Solutions Provider for FTTx, RFoG, and HFC
www.ascentcomtec.com
Page 7 of 50
Figure 1-4: Push button Panel
Figure 1-5: LED Panel
LED
Status
Description
POWER
On
The device is powered up.
Off
The device is powered down.
PON
On
The device has registered to the PON system.
Blink
The device is registering the PON system.
Off
The device registration is incorrect.
LOS
Blink
The device doses not receive optical signals.
Off
The device has received optical signal.
SYS
On
The device system runs normally.
Off
The device system runs abnormally.
WIFI
On
The WIFI interface is up.
Blink
The WIFI interface is sending or/and receiving data (ACT).
Off
The WIFI interface is down.
WPS
Blink
The WIFI interface is securely establishing a connection.
Off
The WIFI interface does not establish a secure connection.
FXS
On
Phone has registered to the SIP Server.
Blink
Phone has registered and data transmission (ACT).
Off
Phone registration is incorrect.
LAN1 to LAN4
On
Ethernet connected properly (LINK).
Blink
Ethernet is sending or/and receiving data (ACT).
Off
Ethernet connection exception or not connected.
Worn (CATV)
On
Input optical power is higher than 3dbm or lower than -13dbm
Off
Input optical power is between -13dbm and 3dbm
Normal (CATV)
On
Input optical power is between -13dbm and 3dbm
Off
Input optical power is higher than 3dbm or lower than -13dbm
Table 2: Panel Lights Description
