AP201CWT GPON 1 GE + WiFi ONT
Solutions Provider for FTTx, RFoG and HFC www. ascentcomtec.com
Page 8 of 32
Indicator
Description
1
PWR
Power status
On: The ONU is power on
Off: The ONU is power off
2
CATV
CATV port status
On: CATV optical normal(> -9 dBm)
Off: The CATV signals are not received (< -9 dBm)
3
WIFI
WIFI
On: WiFi function is on
Blinking: Data is being transmitted
4
LANn
LAN port status
On: Ethernet connection is normal
Blinking: Data is being transmitted through the Ethernet port
Off: Ethernet connection is not set up
5
LOS
GPON optical
signals
On: Optical power lower than receiver sensitivity
Off: Optical in normal
6
PON
ONU Register
On: Success to register to OLT
Blinking: In process of registering to OLT
Off: In process of registering to OLT
Connect the fiber: Insert the SC fiber connector into the PON connector on the rear panel of the
ONU.
Connect the Ethernet cable: Connect the RJ-45 Ethernet cable to any LAN port and each home
device, that is, the computer, IPTV set-top box, and so on.
Connect coaxial cable: Connect the coaxial cable to the RF connector of the ONU.
Connect the AC adapter: Plug the AC / DC adapter into the AC wall jack and the ONU 12V DC
power jack.
