AP201CWT GPON 1 GE + WiFi ONT
Solutions Provider for FTTx, RFoG and HFC www. ascentcomtec.com
Page 19 of 32
Login ONU WEB, select
Internet -> Internet Config -> Internet Config
, and then there are
some parameter for us to configure as follows:
【
WAN Connection name
】
Select ‘Add WAN Connection’
【
Mode
】
Select ‘Bridge’
【
Connection Mode
】
Select ‘Ipv4’; If there is Ipv6 in the network, we can select ‘Ipv4/Ipv6’.
【
NAT
】
Don’t check ‘NAT’ feature; NAT is mainly used for address translation function of
local network and external network. HGU ONU doesn’t deal with the packets from the
teminal, so we needn’t enable the NAT function.
【
Enable Vlan
】
We can set this option according to your network plan. If there is VLAN in the
network for Internet, we have to check ‘Enable VLAN’ option. If not, we needn’t check this
option, which will be VLAN transparent mode.
【
Vlan ID
】
Configure this option according to our network plan.
【
MTU
】
The default is 1500; we have to change to lower MTU,
such as 1400
, if we can ping
the DNS but not access the website via WEB browser.
【
Service Mode
】
Select ‘Other’ or ‘Internet’; Normally, select ‘Internet’ for Internet or flow
testing; Select ‘Other’ for IPTV service.
【
LAN DHCP Disable
】
Check this option; Normally, Terminal , connected to the HGU ONU,
will get an IP address from the upper DHCP server. Therefore, we need check this option to
avoid the terminal get an IP from the ONU.
【
Bind port
】
Bundle the physical ports (Lan port 1-4 and wireless) with Bridge WAN
connection.
Note
By default, all LAN ports and WIFI data are not bound by this WAN connection (a LAN and WIFI
SSID can only be bound to a WAN connection at the same time).
