background image

 

_____________________________________________________________________

ATLANTIC SATELLITE CORPORATION             
MODEL ASC300LW 
BEACON RECEIVER 

16 

8.0 Warranty: 

Atlantic Satellite Corporations Warranty Policy 

ASC2006-05-20 

 
Atlantic Satellite Corporation (ASC) (Seller) warrants the items manufactured and sold by ASC to be free 
of defects in material and workmanship for a period of two (2) years from date of shipment. ASC’s 
obligation under its warranty is limited in accordance with the periods of time and all other conditions 
stated in all provisions of this warranty. 
This warranty applies only to defects in material and workmanship in products manufactured by ASC. ASC 
makes no warranty whatsoever concerning products or accessories not of its manufacture. Repair, or at 
ASC’s option, replacement of the ASC products or defective parts therein shall be the sole and exclusive 
remedy for all valid warranty claims. 

 
Warranty Period 

The applicable warranty period shall commence on the date of shipment from ASC’s facility to the original 
purchaser and extend for the stated period following the date of shipment. Upon beginning of the applicable 
ASC warranty period, all customers’ remedies shall be governed by the terms stated or referenced in this 
warranty. In-warranty repaired or replacement products or parts are warranted only for the remaining 
portion of the original warranty period applicable to the repaired or replaced products or parts. Repair or 
replacement of products or parts under warranty does not extend the original warranty period. 

 
Warranty Coverage Limitations 

The following are expressly 

not covered 

under warranty: 

1. Any loss, damage and/or malfunction relating in any way to shipping, storage, accident, abuse, 
alteration, misuse, neglect, failure to use products under normal operating conditions, failure to use 
products according to any operating instructions provided by ASC, lack of routine care and maintenance as 
indicated in any operating maintenance instructions, or failure to use or take any proper precautions under 
the circumstances. 
2. Products, items, parts, accessories, subassemblies, or components which are expendable in normal use or 
are of limited life, such as but not limited to, bulbs, fuses, lamps, glassware, etc. ASC reserves the right to 
revise the foregoing list of what is covered under this warranty. 

 
Warranty Replacement and Adjustment 

ASC will not make warranty adjustments for failures of products or parts, which occur after the specified 
maximum adjustment period. Unless otherwise agreed, failure shall be deemed to have occurred no more 
than seven (7) working days before the first date on which ASC receives a notice of failure. Under no 
circumstances shall any warranty exceed the period stated above unless expressly agreed to in writing by 
ASC. 

 
Liability Limitations 

This warranty is expressly in lieu of and excludes all other express and implied warranties, Including but 
not limited to warranties of merchantability and of fitness for particular purpose, use, or applications, and 
all other obligations or liabilities on the part of ASC, unless such other warranties, obligations, or liabilities 
are expressly agreed to in writing by ASC. All obligations of ASC under this warranty shall cease in the 
event its products or parts thereof have been subjected to accident, abuse, alteration, misuse or neglect, or 
which have not been operated and maintained in accordance with proper operating instructions. In no event 
shall ASC be liable for Incidental, consequential, special or resulting loss or damage of any kind howsoever 
caused. ASC’s liability for damages shall not exceed the payment, if any, received by ASC for the unit or 
product or service furnished or to be furnished, as the case may be, which is the subject of claim or dispute. 
Statements made by any person, including representatives of ASC, which are inconsistent or in conflict 
with the terms of this warranty, shall not be binding upon ASC unless reduced to writing and approved by 
an officer of ASC. 

 

 

Summary of Contents for ASC300LW



















Reviews: