_____________________________________________________________________
ATLANTIC SATELLITE CORPORATION
MODEL ASC300LW
BEACON RECEIVER
11
On the Model pull down screen select the model that you will be working with. In this
case you will see that the model
ASC300LW
has been selected. You will also see that
the baud rate has been set at
2400
and the
Address
has been set to
F
.
Note all other
ASC300 series beacon receiver baud rates should be set to 2400.
Set the connection to
Serial
. Select the
COM Port
to be used. In this case the
COM2
has been selected. Note:
if the Ethernet Options is installed you can also set the
Destination IP & Port
at this
time. Click
OK
.
If the selected
Com port
is not supported then the following screen will appear.
If the selected
Com port
is supported then the following screen will appear.
Click on the
Edit
button and the below screen will appear.
