IPCOM-4G
1354 012 99 = Ethernet cable is not connected
1354 034 99 = SIM card not present
1354 999 99 = Comm Trouble between the IPCOM-4G and the control panel
1354 001 99 = Comm Failure on channel IP #1 (Ethernet)
1354 003 99 = Comm Failure on channel GPRS #1
1354 006 99 = Comm Failure on channel GSM #2
1354 000 99 = Comm Failure for all channels in 3-4-5-6 mode.
1354 020 99 = Comm Failure for channels 3 and 4 in 3-4; 5-6 mode.
1354 100 99 = Comm Failure for channels 3 and 5 in 3-5; 4-6 mode.
1354 200 99 = Comm Failure for channels 4 and 6 in 3-5; 4-6 mode.
SMS programming
In case it is needed (and the SIM card used in the unit is capable to send and receive SMS messages), the most
important features and parameters can be configured using SMS messages.
An SMS message can contain multiple commands, separated by spaces. The proper execution of the commands is
verifyed by answering an „OK” messages. If there is any problem with the commands, an „ERROR” reply message is
generated. After some specific control commands, the device will perform a reboot.
A security code is necessary for the SMS programming. It can be set in the Terminal, the default value is 1234.
Furthermore, the security code starts with a hash-tag(
), and it is closed with a asterisk(*). Then the command has to be
written with a space.
SMS command list
Description
SMS
command
x value
value after = sign
Example
The communicator will be reset
within 30 seconds.
reset
Command
#1234* reset
The communicator reports the
status of its inputs and its firmware
version.
?
Command
#1234* ?
Sets the APN for the SIM card
apn
=
apn
apn,apn-user,apn-psw
#1234* apn=online
#1234* apn=my.apn,id,pw
Sets the account-id of the
communicator globally, or by
individual channels. The device will
restart within 30 seconds.
a
x
The number of the
channel
=
Account-id
#1234* a=1234
#1234* a3=5678
Sets the test period in minutes, for
the given channel. The period
value can be between 0 and
65535, setting 0 will disable test
reports. The device will restart
t
x
The number of the
channel
=
test-period
#1234* t4=10
Page 14