Asap Mustang S380, Owner'S Manual

Page: 11 / 33

ASAP Canopies’ S-Series Powered Parachute Canopy Owner’s Manual May 10, 2010 Page 11 of
33
The following chart gives the required riser lower attachment Spread and associated Riser length combinations for correct in-
flight geometry. These dimensions expressed in “inches must be strictly adhered to for the proper operation and safety of the
Thunderbolt canopies. It is possible to have a variance of 2-3 inches on either dimension and still be within the safety limits of
this canopy. If the riser lower attachment spread cannot be modified to suit the chart then the riser length MUST BE modified to
suit for proper in-flight geometry!! i.e. The combination of the two (riser lower attachment spread and riser length) MUST match
the riser chart below in order to be correct. For example: a 60” attach distance spread for a model E340 must use a 47” canopy
riser.
Model S380 S420 Models S500 & S550
Spread
Riser
Riser Riser
40 127 107
89
41 123 104
87
42 119 101
85
43 115 98
83
44 111 95
81
45 107 92
79
46 103 89
77
47 99 86
75
48 95 82
72
49 91 79
70
50 87 76
68
51 83 73
66
52 79 70
64
53 75 67
62
54 71 64
60
55 67 61
58
56 64 58
56
57 60 55
54
58 56 52
52
59 52 49
50
60 48 46
48
61 44 43
46
62 40 39
43
63 36 36
41
64 32 33
39
65 28 30
37
66 24 27
35
67 20 24
33
68 16 21
31
69 12 18
29
70 8 15
27