Asante INTRACORE 3724PWR, User Manual, Page: 7 / 154

Chapter 1: Power over Ethernet (PoE)
The IntraCore IC3724PWR 24-port + 2 Gigabit Layer 2+ Managed Switch is a high-performance network switch used
to reduce network congestion and application response times. The 24-port IntraCore IC3724PWR multi-protocol
switch supports Layer 2+ and Ethernet switching. The switch has 24 10/100BaseT ports with Auto-Uplink and has 2
combination ports used for sharing with SFP mini GBICs. Fiber technology is used to connect two switches together.
The switches also have an SNMP-based management agent embedded on the main board. This agent supports both
in-band and out-of-band access for managing the switch.
These switches have a broad range of features for Layer 2+ switching delivering reliability and consistent
performance for network traffic. The switches improve network performance by segregating them into separate
broadcast domains with IEEE 802.1Q compliant VLANs and provide multimedia applications with multicast switching
and CoS services.
The system can operate as a stand-alone network or be used in combination with other IntraCore switches in the
backbone.
1.1 Features
The IntraCore IC3724PWR Ethernet switch is a 24-port Layer 2+ multi-media, multi-protocol (Ethernet and Layer 2+)
switch. The following is a list of features:
•
24 port 10/100 switch with auto-uplink
•
2 port gigabit combo ports
•
Supports wire-speed L2+ switching
•
CoS provisioning on Layers 2 and 802.1p, IP precedence (TOS, DSCP )
•
Packet filtering
•
8K MAC address
•
Up to 255 configurable 802.1Q based VLAN groups
•
Up to 256 multicast groups, statically created or dynamically created by IGMP snooping
•
SNMP v1, v2, and RMON, statistics counters supported
•
Spanning Tree Protocol 802.1D (standard), 32 instances of 802.1w (rapid) VLAN and 802.1s (multiple)
•
6 trunks and 8 ports/trunk link aggregation
•
4 MB internal packet buffer
•
Support for Jumbo Frames (up to 9 KB in length)
7
Asante IC3724PWR
User’s Manual