manualshive.com logo in svg

Asante INTRACORE 3724PWR, User Manual, Page: 20 / 154

Share
Download
Asante INTRACORE 3724PWR User Manual Download Page 20

 

Chapter 3: Initial Software Setup 

Configure the switch by connecting directly to it through a console (out-of-band management), running a terminal 
emulation program, such as HyperTerminal or by using telnet. 

3.1 Connecting to a Console 

To connect the switch to a console or computer, set up the system in the following manner: 

7.  Plug power cord into the back of the switch. 

8.  Attach a straight-through serial cable between the RS232 console port and a COM port on the PC. 

9.  Set up a HyperTerminal (or equivalent terminal program) in the following manner: 

a.  Open the HyperTerminal program, and from its file menu, right-click on 

Properties.

 

b. Under 

the 

Connect To

 tab, choose the appropriate COM port (such as COM1 or COM2). 

c 

 

 

d 

b 

 

c. Under 

the 

Settings

 tab, choose Select Terminal keys for Function, Arrow, and Ctrl keys. Be sure the setting 

is for Terminal keys, NOT Windows keys  

d.  Choose VT100 for Emulation mode. 

20 

Asante IC3724PWR 

User’s Manual

 

 

Summary of Contents for INTRACORE 3724PWR



























































































































































Reviews:

No comments