manualshive.com logo in svg

Asante FriendlyNET VR2004 Series, User Manual

Share
Download
Asante FriendlyNET VR2004 Series User Manual Download Page 66

FriendlyNET VPN Security Router 

66 

Advanced

 

Settings 

DHCP:                                                   Dynamic host configuration protocol automatically assigns 

IP address to specified clients. Choose address pool range. 
Reserve LAN IP addresses for selected devices (by MAC 
addresses). 

Virtual Server:                                       De-Militarized Zone (DMZ) for specific IP address. Forward 

service port range to specific LAN IP address. 

Static Routing:                                       Destination IP address, subnet mask and gateway address. 
Dynamic Routing:                                  Send (RIP 1, RIP 1/2) and receive (RIP 1, RIP 1/2). 
LAN Filtering:                                        Secure packet inspection (SPI) filters (block or pass) out-

bound LAN traffic based on specified protocols, IP address 
range and destination service port ranges. 

WAN Filtering:                                       Secure packet inspection (SPI) filters (block or pass) in-

bound WAN traffic based on specified protocols, IP address 
range and destination service port ranges. 

Administration:                                      Password, enable remote administration, remote admin 

HTTP port, remote IP address and remote ping. Enable 
system log, log server IP address and detail IPSec debug 
log. Force PPPoE to reconnect. Force maximum transmis-
sion unit (MTU) size. 

Dynamic DNS:                                      Dynamic DNS server, host name, user name and password. 

Accepts wildcards. 

URL Filtering:                                        Blocks access to targeted URLs 
Email Alert:                                            Sends system alerts and logs via email to email server and 

destination email address. Schedule immediately, hourly, 
daily (at specific time) or only when log is full. 

 

System Tools 

Intruder Detection:                                Identifies suspicious activity and protects against 11 differ-

ent types of denial of service (DoS) attacks, logs time, pro-
tocol, source IP address (and port), destination IP address 
(and port) and describes event. 

Routing Table:                                       Displays type (INTF, RIP1), destination IP address, subnet 

mask, gateway IP address and hop count. 

System Status:                                      Summarizes complete router configuration and status. 
Settings:                                                Saves or loads router settings from a file (or factory default).  
Upgrade Firmware:                               Links to asante.com to check for latest firmware. Upgrade 

firmware from a file. 

Reset Device:                                        Restarts router. 
 

Security Features 

Firewall:                                                 Hides local network addresses behind the router using Net-

work address translation (NAT). Secure Packet Inspection 
(SPI) evaluates both inbound (WAN) and outbound (LAN) 
packets. 

Summary of Contents for FriendlyNET VR2004 Series













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands