Asante FriendlyNET GX5-2400W, User Manual

Page: 17 / 77

Page 7 GX5-2400W User’s Manual Asante Technologies Inc
3 Quick start guide
This section provides the basic instructions to set up the switch environment.
Part 1 shows you how to install the switch on a flat surface or on a rack.
Part 2 provides instructions to set up the hardware.
Part 3 shows you how to configure basic settings on the switch.
Obtain the following information from your network administrator before
proceeding:
IP address for the switch
Default gateway for the network
Network mask for this network
3.1 Part 1 — Installing the hardware
Connect the device to the power outlet, and your computer or network.
Figure 5 illustrates the hardware connections.
3.1.1 Installing the switch on a flat surface
The switch should be installed on a level surface that can support the weight of
the switches and their accessories. Attach four rubber pads on the marked
location on the bottom of the switch.
3.1.2 Mounting the switch on a rack
5. Attach brackets to each side of the switch and make the posts insert to
the switch.
6. Insert and tighten two screws to securely attach the bracket to the rack
on each side.
3.2 Part 2 — Setting up the switch
Connect the device to the power outlet, and your computer or network. See
Figure 5.