Page 2-4
Installation
Figure 2-2 Connecting the EN/SC-10T/TN Adapter as a single SCSI device
3
Connect the adapter to the Ethernet cable. Follow
the guidelines below for your cable type:
10BaseT cabling
• Plug the RJ45 connector on one end of the Ether-
net cable into the adapter’s RJ45 jack, and plug the
other end into a 10BaseT network hub.
Thin cabling
• Check with your network administrator before con-
necting the EN/SC Adapter to the network.
• If the Ethernet cable does not have a T-connector or
a BNC barrel connecting two cable segments,
splice the cable with the appropriate BNC hard-
ware.
• Connect the BNC-T connector on the Ethernet
cable to the adapter’s BNC port.
• If the Macintosh is at the end of a network seg-
ment, keep the T-connector and terminator on the
segment cable and connect the T-connector to the
adapter’s BNC port. The connector slips on, twists,
and locks in place.
BNC port
RJ 45 port
Asanté DB-25 to
DB-25 SCSI cable
SCSI port
EN/SC-10T/TN Adapter
Macintosh Classic
