Page 4-2
Troubleshooting
Other tips
About EtherTalk Phase 1 and Phase 2
If you have installed EtherTalk Phase 1 and Phase 2, selecting
Phase 1 may make Phase 2 network resources invisible and
unavailable. The reverse is true for Phase 2. To see if this is
the case, switch from one EtherTalk icon to the other.
Phase 1 networks are limited to 254 nodes and one zone. In a
Phase 2 network, up to 16 million nodes can be addressed on an
Ethernet network. Phase 2 networks support multiple zones
sharing the same physical cable. A great majority of network
installations now use only Phase 2.
