Page 3-3
Asanté Dekstop EN/SC Adapters User’s Manual
Figure 3-1 TroubleShooter window
Running other TroubleShooter tests
The Loopback and Bandwidth Utilization tests are available in
addition to the three default tests for validating the EN/SC
Adapter.
Running the Loopback test
The Loopback test verifies the operation of the major compo-
nents of the interface circuitry, the adapter, the serial network
interface, and the thin port transceiver by transmitting and
receiving special packets.
When using the Desktop EN/SC-10T/TN Adapter, disconnect the
thin Ethernet cable and attach a T-connector. Terminate each end
of the T-connector with a 50-ohm terminator.
To run the Loopback test, perform the following steps:
1
Click the
Loopback Test
checkbox to select the test.
2
Click
TEST
to start the Loopback test.
3
If the first test fails, click
REPEAT
.
Memory Test Passed
NIC Test Passed
Ping-Pong Test Passed
