7
6
Check that the canister or tube is not leaking air.
Make sure to close the lid of the liquid catch canister and connect the tube.
Set the sealing time.
Set the seal timer taking bag thickness and
material into account.
（Seal timer number：1=1sec、2=2sec ...)
Checking the seal condition, set the appropriate
seal time as follows.
Place item(s) in the bag.
Before Placing Items in Bags・・・
-
-
-
-
-
※ In automatic vacuum mode or manual vacuum mode, make sure the nozzle is out.
Thickness(μｍ)
６０μ ７０μ ８０μ ９０μ １２０μ
４
４
５
５
７
Sealing time(sec.)
Sealing time (sec.)
＋Button
−Button
Select/Pause Button
Operating Instructions
※If the nozzle vacuums the bag or its contents, vacuum mode may automatically switch
to seal mode even if the bag contains air. ( See “Operating Instructions”, page 8. )
Green light
Red light
Automatic
Vacuum Mode
Seal Mode
Manual
Vacuum Mode
※In the automatic vacuum mode in embossed bag mode, switching to the seal mode is possible
by pressing the start button.
Timer button
Power switch
2
1
Check the operation mode.
3
When item volumes are small for the bag size or bags are remarkably thin, it may
make the vacuuming process difficult. If the item voluume is small, prepare a bag
of appropriate size or use an embossed bag.
Please use an embossed bag for powders or highly viscous items such as curry,
sauce, etc.
When you place item(s) in the bag, prevent water contact with the seal area of
the bag.
Some vegetables emit gases during storage. The bag may inflate after vacuum sealing.
Use bags with high pinhole resistance when packing items with protrusion.
5
4
6
Begin vacuuming after
placing the bag in position.
After vacuuming process,
seal mode will turn on
automatically.
Checking the degree of
vacuum, this mode can
switch to the userʼs selected
seal mode. After the bag is
inserted, vacuum mode
continues. Press the start
button again and turn on
seal mode.
This mode seals the bag
only. Use this mode when
items do not need vacuum
or you want to perform the
sealing process manually.
The light on the cover top indicates operating mode and progress.
Manual
Vacuum Mode
Seal
Mode
Automatic
Vacuum Mode
Manual
Vacuum Mode
Seal
Mode
Automatic
Vacuum Mode
- Standard vacuum bags mode -
- Standard vacuum bag mode -
- Embossed vacuum bags mode -
- Embossed vacuum bag mode -
Plug the power cord into the receptacle outlet.
Set the bag type as required when turning on the switch.
Turn on the power switch
while pressing down the
mainus(−) button.
The light turns on.
Turn on the power switch
while pressing down the
plus（＋） button.
The light blinks slowly.
To select the bag mode, turn
on the power switch while
pressing down the + (plus)
button or-(minus) button of
the timer.
If turning on the power
without pressing the timer
button, the previously used
mode will be continued.
−
＋
＋
＋
Set the operation mode.
There are three operation modes for
the standard vacuum bag mode and
embossed bag mode respectively.
Each time the select button is pressed,
the light indicator changes on the cover,
and the mode will change as follows.
The red light
turns on
The red light
blinks slowly
The green light
turns on
The green light
blinks slowly
The Both lights
turn on
The both lights
blink slowly
ex. Standard nylon-poly vacuum bag
