ASAHI ASV-320D User Manual Download Page 2

2

3

Safety Precautions

Important Safeguards

Items shown here are categorized as     Warning or     Caution.

Even items categorized as     Caution may lead to serious results depending on the 

circumstances. Important information about safety is written in all cases and must be observed 

without fail.

Warning 

This indicates death or serious injury may result if this label is not 

heeded and the product is used improperly.

Caution 

This indicates that injury or property damage may result if this label is 

not heeded and the product is used improperly.

Warning 

Avoid contact with water, which can result in a short or electric shock.

Do not use the appliance if tape is not placed on the seal strip.

This may cause fire, electric shock, or burns and injuries.

Close supervision is necessary when any appliance is used near children.                        

Children should not operate.

Only a certified repairman should perform any dismantling, repairs or 

modifications.

Fire or abnormal operation may result in injury.

Always unplug the appliance from the outlet for repair.

Use the outlet only for this appliance (3.15 A or more).

Overloaded outlets may cause overheating or fire.

Wipe away any dirt on the plug.

Grime may cause fire.

Be sure to ground the grounding terminal properly

 to prevent electric shock.

Use a designated part for the seal area.

Apply the PTFT strip after replacement.

Inappropriate replacement can cause overheating, fire or electric shock.

Clean or replace the sealing strip after turning off the switch and 

unplugging the unit.

Do not plug in or unplug electrical equipment with wet hands.

Do not hold near flame or use in an unstable location.
This may result in fire, injury or deformation.
When vacuum packing, do not vacuum liquid without attaching the liquid catch 
canister.
Do not put fingers on the PTFT strip.
Closing the seal bar may pinch or burn fingers.
Use the unit only when the bag is placed in position.
This can cause overheating or fire.
Use the appliance only for its intended use.
Improper use may cause electric shock, short or fire.
Do not allow the unit to vacuum flammable liquid or gas. Fire may result.
Quality of vacuum packing is not guaranteed.
Conditions such as packaged food shelf life and vacuum method may cause food 
degradation or rot.
Grasp plug to remove the cord from the receptacle outlet.
Failure to do so may result in cord damage, electric shock, short or fire.
Do not use an unstable outlet or a damaged cord or plug.
Failure to do so may result in electric shock, short or fire.
Do not place heavy objects on the power cord, apply excessive force, deform or 
bundle it. Damaging the power cord may cause electric shock or fire.
Do not touch hot surfaces , which may cause burn.
Unplug the appliance from the outlet when not in use.
A burn, electric shock, short or circuit fire may result.

Caution 

Should your product not perform properly, restart it.

Hold the bottom of the unit while carrying.
Handle the nozzle carefully.
When you are vacuum packing moist food, empty the liquid catch 
canister before filling it more than half with water.
Unplug the appliance from the outlet when not in use. Store the unit
with the vacuum nozzle housed and the seal bar raised.

Do not use strong solvents such as benzene or thinner when cleaning.
Do not drop or subject the appliance to a strong shock.
Do not place objects on the appliance.

Additional Safety Instructions

Summary of Contents for ASV-320D









Reviews: