8
XRV10
Power On / Off
Press the
[
]
knob on the unit to turn the unit on. The buttons on the front of the unit
light up for a moment and the current mode status appears in the LCD.
Press and hold the
[
]
knob to power off the unit.
Playing Source Selection
Press the [
] button on the front panel to display the playing
source menu.
1. Prev or Next: Touch to view the previous or next page of
playing
source
s.
2.
Playing source
icon: touch to access corresponding work mode.
3. Clock
4. Enter EQ setting menu
Volume Adjustment
To increase or decrease the volume level, turn the
[
]
knob on the front panel. The
volume range is from “0” to “50”. The LCD or TFT screen displays the volume level for 3
seconds.
Mute
Press [
] knob to mute the volume from the unit. Press again to restore the volume. [
] is
displayed on the LCD. Adjusting the volume or using any of the audio setup features cancels the mute
function.
Parking Brake Inhibit
• When the “BRAKE” cable is connected to the brake switch, the display on the TFT monitor
will display video only when the vehicle is applied.
• Parking brake function is overridden when the video source is set to REVERSE.
• When the parking brake inhibit is active, the front monitor displays Warning information,
preventing the driver from watching content while driving. Rear video screens are not affected.
Demo
Demo mode is used to illustrate the functions of the unit. Touch the screen to exit it.
Demo mode is default on. You can turn it off in Setting menu.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The Beep tone can be disabled through
the Setup menu.
QUICK START GUIDE
1
1
2
3
Summary of Contents for XRV10
Page 36: ...36 XRV10 NOTES...
