29
XRV10
CAMERA OPERATION
Enter Camera Mode
Connect the cameras to the unit using the CAMERA 1-3 Connection cables at the back of the unit. Enter
2nd page of main menu, press CAMERA to access camera mode.
Enter Camera Mode
This unit can connect 3 cameras: CAM1, CAM2 and CAM3. Each camera can be triggered seperately and
can be set in different trigger priority. There are 3 trigger wires at the back of the unit. If trigger signals
are detected on more than one trigger wire, the channel that has the highest priority is triggered first.
Once a channel is triggered, the triggered channel video will be displayed on the full screen, Only CAM
1 has audio input.
Auto Mic Enable
When the Auto Mic Enable feature is set to “Yes”, the current playback audio will be muted and the
microphone for camera 1 will be automatically turned on when the vehicle is placed in reverse gear.
See “Camera Conguration”:
Setting
Func
Function
Camera 1 mode
Skip
The output of camera 1 image is skipped.
Normal (default)
The output of camera 1 image is in normal mode.
Mirror
The output of camera 1 image is in mirror mode.
Camera 2 mode
Skip
The output of camera 2 image is skipped.
Normal (default)
The output of camera 2 image is in normal mode.
Mirror
The output of camera 2 image is in mirror mode.
Camera 3 mode
Skip
The output of camera 3 image is skipped.
Normal (default)
The output of camera 3 image is in normal mode.
Mirror
The output of camera 3 image is in mirror mode.
Priority Order
1-2-3
Continue pressing to select the desired camera trigger
priority from 1(highest) to 3 (lowest).
1-3-2
2-1-3
2-3-1
3-1-2
3-2-1
Trigger Delay
One Second
Set delay time for displaying camera image after trigger
signal is removed.
Two Seconds
Three Seconds
Four Seconds
Five Seconds
Six Seconds
Auto Mic Enable
Yes
Select “Yes” to automatically turn on the microphone and
mute other audio when the vehicle is in reverse gear
No
Summary of Contents for XRV10
Page 36: ...36 XRV10 NOTES...
