31
XRV10
SWC Ready
The built-in SWC Interface is compatible with PAC steering wheel control modules. The PAC SWI-RC is
recommended.
A third-party adapter must be used in order for the unit to be compatible with any steering wheel
controls.
Note:
Not all OE steering wheel functions may be supported by the unit. PTT - Will activate Siri / Google
Voice if mobile phone supports the feature. Not compatible with all phones/vehicles.
The following controls are available for most vehicles:
1. Volume Up (+)
4. Preset (+)
7. Seek / Track +
10. BT Send
2. Volume Down (-)
5. Preset (-)
8. Seek / Track -
11. BT End
11. BT End
6. Source
9. Band
12. PTT
PAC SWI-RC Installation Hints
1. Set “Radio Select Switch”. Set the SWI-RC to position 7 - “Pioneer/Other/Sony”.
2. Programming - Use the Pioneer/Sony/Other radio function mapping order for branded head units.
3. When programming the SWI-RC, if a function is not supported (or not desired), then the function
MUST be skipped as per the PAC SWI-RC instructions.
4. The SWC function MUST be programmed in the correct order per the PAC SWI-RC radio function
mapping order instructions.
SWI-RC (5VDC Reference)
Function Mapping
Center Pin Voltage
(Function Select)
Tip Pin Voltage
H 5.0v
2.89
Volume -
H 5.0v
3.40
Mute
H 5.0v
1.37
L 0.0v
2.15
Preset -
L 0.0v
2.56
Source
H 5.0v
0.79
Seek +/ Track +
H 5.0v
2.15
Seek - / Track -
H 5.0v
2.56
Band
H 5.0v
3.94
BT Answer Call
L 0.0v
1.37
BT End Call
L 0.0v
1.79
PTT / Voice Activation
L 0.0v
3.94
Summary of Contents for XRV10
Page 36: ...36 XRV10 NOTES...
