INTRODUTION
SPECIFICATION
Display:LCD
Measurement Range:Wood:6~42%
Material:0.2~2.0%
Temperature:0~40°C
，
or 32~99°F
Resolution:Wood:1%
Material:0.1%
Temperaure:1°C/2°F
Accuracy:Wood: reading<30%:±2%
reading
≥
30%
：
±4%
Material:reading<1.4%:±0.1%
reading:
≥
1.4%±0.2%
Temperature:not specified
Low Battery Indication:Symbol “
” shown on the display
Automatic Power-Off
Battery: 9V Zinc-carbon battery
Operating Environment:Temperature:0℃~40℃
Relative humidity:<85%
Storage Environment:Temperature:-10℃~50℃
Relative humidity:<85%
Size:80*40*20mm
Weight:about 150g (including batteries)
This instrument can be used to measure the moisture level in sawn timber (also paper,cardboard) and
hardened materials(mortar,concrete and plaster). It displays the moisture level directly. In addition, it can also
measure environment temperature. It is portable and very easy to use.
“
”---- Batteries are low and should be replaced
“ ”----Wood moisture measurement mode is selected.In
this mode,you can measure the moisture level of sawn
timber,paper or cardboard.
“ ”-----Material moisture measurement mode is
selected.In this mode,you can measure the moisture
level of hardened material(mortar concrete or plaster).
“%”----Percent(moisture unit)
“℃”----Celsius degree
“℉”---Fahrenheit degree
FACEPLATE INSTRUCTION
1.
Probe
2.
Indicatior for moisture
3.
Degrees or Fahrenheit select key
4.
Wood moisture or Material moisture select key,
Reduction of the value when set the warning value
5.
Power
6.
Auto backlight sensor
7.
Data Hold; Add the value when set the warning value
8.
LCD Display
OPERATION INSTRUCTION
1. Press Power to power on the device.
2. Selecting Desired Measurement Mode
a. After the instrument has been turned on.press the “SELECT” button to select Wood moisture measurement
mode or Material moisture measurement mode .
b. Press the “℃/℉” button to select Celsius degree measurement mode or Fahrenheit degree measurement
mode .
LCD
EXPLANATION
as - Schwabe GmbH · Hummelbergstr. 6 · 72184 Eutingen · www.as-schwabe.de