AS ONE NDK-1A-F, Instruction Manual, Page: 23 / 27

- 22 -
➊ -|Transparent setting guide|-
Q. I want to set the temperature faster. Is it just a way to turn the JOG switch?
A. You can move the set value via the MODE key.
Q. Please release the drawings of the heater.
A. Sorry. It cannot be released.
Q. There is dust in the gap between the top plate, is there any problem?
A. Heater and insulation are installed under the top plate.
It does not matter that small dust falls.
Also, white and cloth-like insulation may be seen, but there is no problem in use.
Q. Is it possible to turn on the power (or heater output) with an external input?
A. It is impossible, even in the state of communication with PC.
Q. Is it an explosion-proof product?
A. It is not an explosion-proof specification.
Q. Please release the CAD drawings.
A. Sorry. It cannot be released.
FAQs
Mica plate
Sensor
(temperature
sensing part)
Top plate
Mica plate
Heater line(bold line)