Arzum WINDREAM POWER AR 063, Instruction Manual

Page: 14 / 28

14 ARZUM
CAUTION: Height adjustment ring must be fully fastened before the
assembly of the motor section to the stand.
Assembly of Grills and Blade
- Remove blade fixing nut and grill connection nut.
- Fix the rear grill and connection nut to the motor shaft, then tighten
the nut to place back grill tightly
- Place main fan blade to fit in the hub and channel on engine axle. Be
sure fan blade is placed to the pin on engine axle. Then, place second fan
to engine axle.
It is very important to place blades fully. Otherwise, fan turns idle during
operation and may damage product.
- Use fanten nut for fan blade to hold blades in place fully.
- Use the screw to fix plastic ring, just until it is fine.
- Assemble the ring to front grill.
OPERATION of YOUR ARZUM WINDREAM
POWER STAND FAN
Remote Control:
- On/Off
It is to turn on your fan. Once you press the button, your
device starts to operate at Speed level 1. Press this button
again if you need to turn off your device.
- Speed
It is to set desired fan speed level.
(1-Low, 2-Medium, 3-High).