Arzum OKKA OK001, Manual

Page: 23 / 76

23 ARZUM OKKA
EN
Troubleshooting
PROBLEM
Appliance interrupts
during a boiling or
self-cleaning process.
Power failure.
All warning LEDs are
flashing accompanied by
an acoustic signal.
Technical data Informations de contact
The water chamber
is empty.
The unit is off after
a power failure in
the mains supply.
Technical fault in
the appliance.
Rated voltage :
Rated frequency :
Rated power
input : http://www.arzumokka.com/Home/Contact
0850 222 1 800
220-240 V
~
50-60 Hz
710 W
The water chamber is
removed.
The brewing head is
removed.
The waste water
tray is full.
The waste water tray is
removed.
Fill the water chamber with fresh cool water.
Switch the appliance on by use of
the On/Off switch at the back of the
appliance. The appliance is performing
a self-test afterwards. It can be reused
once all LEDs are on.
Restart the appliance. If problem per-
sists, please contact the Arzum OKKA
customer service.
Insert the clean and filled water cham-
ber into the appliance.
Apply the brewing head to the appli-
ance.
Empty and clean the waste water tray.
Insert the clean waste water tray into
the appliance.
CAUSE SOLUTION