Command Line Interface
Diagnostics and Identification Commands
INFO
31
www.arwestcom.com
3.5. Diagnostics and Identification Commands
3.5.1. INFO
The INFO command is used to retrieve the Radio ID along with its Hardware version, the loaded
real-time software version/revision and BootLoader’s version/revision.
INFO [Parameter Name] [Parameters List] [/?]
The INFO command without Parameter Name indicates all values:
AW400Tx UHF Radio Modem.
Product ID = 33
S/N = 000000 020303
Hardware = Ver. 1.0
Software = Ver. 1.8 Rev. 14
BootLoader = Ver. 2.0 Rev. 02
Parameter Name
Parameter List
ID
Product ID
SN
Six bytes Serial Number (SN)
HW
1.0 – hardware version in numeric “Major.Minor” format
SW
Ver. 1.0 Rev. A – displays software’s version in numeric “Major.Minor” format and
revision in numeric format (range from 01 to 99) for engineering releases and alphabetic
format (A to Z) for manufacturing releases
BL
Ver. 1.0 Rev. A – displays BootLoader’s version in numeric “Major.Minor”format and
revision in numeric format (range from 01 to 99) for engineering releases and alphabetic
format (A to Z) for manufacturing releases