Product Features
Introduction
Operating at Ultra High Frequency Band
16
www.arwestcom.com
• AWLaunch – Windows based Unit Configuration and Maintenance Software Application
running on a IBM PC compatible computer and connecting to the device over RS-232
interface or USB-to-Serial adapter.
The setting can be done through the built-in Command Line interface (CLI), or through the
configuration and maintenance application software running either on PC – AWLaunch.
The diagnostic feature of the AW400Tx system provides the information to monitor and maintain
user’s communications link. The output transmit power, receive signal strength (RSSI), antenna/
feedline condition, and data decode performance are transmitted online without application
interruption.
The product is designed for maximum performance and reliability even in the harshest
environments. Plug and play at its best, robust, withstanding the most adverse of conditions.
1.1.1. Operating at Ultra High Frequency Band
AW400Tx operates in UHF frequency band covering both licensed and unlicensed frequencies.
The following are its key benefits:
1. Operating in UHF frequency band will provide a non-line of sight connection.
2. User selectable operation mode (licensed or unlicensed mode) is a feature, which makes
AW400Tx system suitable for both licensed and unlicensed markets.
3. Relatively low cost associated with installation equipment compared to the licensed wire-
less bands, since no capital is required to purchase spectrum rights.
4. Single radio system covers the whole UHF frequency band from 406 to 470 MHz;
5. User selectable channel spacing (25 kHz, 20 kHz, 12.5 kHz or 6.25 kHz);
6. User selectable Output power level for Base (30mW/15dBm and 1W/30dBm);
7. Adaptive RF Power control used by Remotes minimizes the transmit power levels and
interference to co-channel and adjacent channel users. It also reduces the Remote’s power
consumption.