6
IAP-228 Wireless Access Point
| Installation Guide
Identifying Specific Installation Locations
Use the AP placement map generated by Aruba’s RF Plan software application to determine the
proper installation location(s). Each location should be as close as possible to the center of the
intended coverage area and should be free from obstructions or obvious sources of interference.
These RF absorbers/reflectors/interference sources will impact RF propagation and should have been
accounted for during the planning phase and adjusted for in RF plan.
Identifying Known RF Absorbers/Reflectors/Interference Sources
Identifying known RF absorbers, reflectors, and interference sources while in the field during the
installation phase is critical. Make sure that these sources are taken into consideration when you
attach an AP to its fixed location. Examples of sources that degrade RF performance include:
Cement and brick
Objects that contain water
Metal
Microwave ovens
Wireless phones and headsets
!
CAUTION
EU Statement:
Lower power radio LAN product operating in 2.4 GHz and 5 GHz bands. Please refer to the
Aruba Instant User
Guide
for details on restrictions.
Produit réseau local radio basse puissance operant dans la bande fréquence 2.4 GHz et 5 GHz. Merci de vous
referrer au
Aruba Instant User Guide
pour les details des restrictions.
Low Power FunkLAN Produkt, das im 2.4 GHz und im 5 GHz Band arbeitet. Weitere Informationen bezlüglich
Einschränkungen finden Sie im
Aruba Instant User Guide
.
Apparati Radio LAN a bassa Potenza, operanti a 2.4 GHz e 5 GHz. Fare riferimento alla
Aruba Instant User Guide
per avere informazioni detagliate sulle restrizioni.
!
CAUTION
This device must be professionally installed and serviced by a trained Aruba Certified Mobility Professional
(ACMP) or similar Aruba-certified technician. Aruba access points are classified as radio transmission devices,
and are subject to government regulations of the host country. The network administrator(s) is/are responsible
for ensuring that configuration and operation of this equipment is in compliance with their country’s
regulations. For complete list of approved channels in your country, refer to the
Aruba Domain Regulatory Table
at arubanetworks.com.
Aruba Networks, Inc. in compliance with governmental requirements, has designed the IAP-228 such that only
authorized network administrators can change configuration settings. For more information about AP
configuration, refer to the
Aruba Instant Quick Start Guide
and
Aruba Instant User Guide
.
!
CAUTION
Access points are radio transmission devices and as such are subject to governmental regulation. Network
administrators responsible for the configuration and operation of access points must comply with local
broadcast regulations. Specifically, access points must use channel assignments appropriate to the location in
which the access point will be used.
