Aruba IAP-228 Installation Manual Download Page 13

IAP-228 Wireless Access Point

| Installation Guide

13

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is 

connected.

Consult the dealer or an experienced radio or TV technician for help.

EU Regulatory Conformance 

Aruba Networks, Inc., hereby declares that the APIN0228

 

device model is in compliance 

with the essential requirements and other relevant provisions of Directive 1999/5/EC -CE(!). The 

Declaration of Conformity made under Directive 1999/5/EC is available for viewing at 

www.arubanetworks.com

.

Proper Disposal of Aruba Equipment

For the most current information about Global Environmental Compliance and Aruba products, see 

our website at 

www.arubanetworks.com

.

Waste of Electrical and Electronic Equipment

Aruba products at end of life are subject to separate collection and treatment in the 

EU Member States, Norway, and Switzerland and therefore are marked with the 

symbol shown at the left (crossed-out wheelie bin). The treatment applied at end of 

life of these products in these countries shall comply with the applicable national 

laws of countries implementing Directive 2002/95/EC on Waste of Electrical and 

Electronic Equipment (WEEE).

European Union RoHS

Aruba products also comply with the EU Restriction of Hazardous Substances 

Directive 2011/65/EC (RoHS). EU RoHS restricts the use of specific hazardous 

materials in the manufacture of electrical and electronic equipment. Specifically, 

restricted materials under the RoHS Directive are Lead (including Solder used in printed circuit 

assemblies), Cadmium, Mercury, Hexavalent Chromium, and Bromine. Some Aruba products are 

subject to the exemptions listed in RoHS Directive Annex 7 (Lead in solder used in printed circuit 

assemblies). Products and packaging will be marked with the “RoHS” label shown at the left indicating 

conformance to this Directive.

China RoHS

Aruba products also comply with China environmental declaration requirements and 

are labeled with the “EFUP 10” label shown at the left.

10

Summary of Contents for IAP-228

















Reviews: