IAP-228 Wireless Access Point
| Installation Guide
3
IAP-228 Hardware Overview
Figure 1
IAP-228 Front View
External Antenna Connectors
The IAP-228 is designed for use with external antennas and has six RP-SMA connectors for external
antennas.
Figure 2
IAP-228 Bottom View
LED
The IAP-228 is equipped with one LED that indicates the system status of the AP.
2G0
2G1
2G2
5G0
5G1
5G2
!
CAUTION
All Aruba devices with external antennas must be installed by an ACMP qualified technician using
manufacturer-approved antennas only. The ACMP installer(s) is/are responsible for ensuring that Equivalent
Isotropically Radiated Power (EIRP) levels for all external antenna devices are compliant with the regulatory
standards of the host country/domain. Installer(s) are required to record the antenna gain for this device in
system management software.
LAN
WAN
Grounding Point
USB Console Port, Reset button and LED
