Aruba AP-85 Outdoor Access Point Series
| Installation Guide
AP-85 Series Installation |
27
Figure 17
Pole Mounting the AP-85 (Diameter Greater than 3.5 Inches)
Positioning the AP-85
To adjust the angle of an AP-85 on a vertical pole:
1. Loosen the four M8 bolts on the side of the mounting plate. Rotate the AP to the desired angle and tighten down the M8
bolts (see
Figure 18
).
Figure 18
Positioning the AP-85 on a Vertical Pole
To adjust the angle of an AP-85 on a horizontal pole:
1. Rotate the entire mounting bracket to the desired angle and tighten the bracket into place (see
Figure 19
).
N O T E
The mounting plate can be secured to a horizontal or vertical pole. The position of the keyholes on
the mounting plate allows you to mount the AP-85 on either pole type with the antenna jacks at the
top or the side. To mount the AP-85 with the antenna jacks at the side, rotate the unit 90 degrees
before seating the unit on the mounting plate.
arun_0135A
Outdoor-Rated Straps
Mounting Plate
Mounting Bolts
AP-85
M8 Positioning Bolts
(4x, 2x per side)
