Aruba AP-85 Outdoor Access Point Series
| Installation Guide
AP-85 Series Hardware Overview |
13
Figure 7
AP-85FX/LX Bottom View
LED Status Indicators
All AP-85 models include visual indicators for power, link, and radio status. Additionally, each radio has a seven-LED array
that indicates received signal strength (RSSI).
Table 2
lists the meanings of the LEDs on the AP-85 outdoor access points.
N O T E
The RSSI LED indicators represent varying degrees in the RSSI level. The absence of a signal is
indicated by no LED response, and full signal strength is indicated when all seven LEDs are active
and lit.
Table 2
AP-85 LED Status Indicators
LED
Function
Indicator
Status
PWR
AP Power/Ready
Status
Off
No power to AP
Flashing
Device booting, not ready
On
Device ready
LINK/ACT
(applicable to the
AP-85TX only)
LAN/Network Link
Status
Off
Ethernet link unavailable
On (Yellow)
10 Mbs Ethernet link negotiated
On (Green)
100 Mbs Ethernet link negotiated
Blinking
Traffic on Ethernet link
LINK/ACT
(applicable to the
AP-85FX/LX models only)
LAN/Network Link
Status
Off
Ethernet link unavailable
On (Green)
100 Mbs Ethernet link negotiated
Blinking
Traffic on Ethernet link
RADIO 0
Radio 0 Status
Off
Radio 0 disabled
On (Green)
Radio 0 enabled in WLAN mode
RADIO 1
Radio 1 Status
Off
Radio 1disabled
On (Green)
Radio 1 enabled in WLAN mode
Grounding Point
