background image

10

Aruba 303H Series Hospitality Access Point  | Installation Guide

Regulatory Information

The regulatory model name for AP-303H/IAP-303H access point is APINH303.

Aruba provides a multi-language document that contains country-specific restrictions and additional safety and 

regulatory information for all Aruba access points. This document can be viewed or downloaded at 

www.arubanetworks.com

.

Medical

1. Equipment not suitable for use in the presence of flammable mixtures.
2. Connect to only IEC 60950-1 or IEC 60601-1 3rd edition certified products and power sources. The end user is 

responsible for the resulting medical system complies with the requirements of IEC 60601-1 3rd edition.

3. Wipe with a dry cloth, no additional maintenance required.
4. No serviceable parts, the unit must be sent back to the manufacturer for repair.
5. No modifications are allowed without Aruba approval.

Canada

User manuals for licence-exempt radio apparatus shall contain the following text, or an equivalent notice that 

shall be displayed in a conspicuous location, either in the user manual or on the device, or both:

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two 

conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the 

device.

Taiwan

第十二條

經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。

 

第十四條

低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。

 

前項合法通信,指依電信法規定作業之無線電通信。

 

低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

!

RF Radiation Exposure Statement:

 This equipment complies with FCC RF radiation exposure limits. This 

equipment should be installed and operated with a minimum distance of 10.63 inches (27cm) between the 

radiator and your body for 2.4 GHz and 5 GHz operations. This transmitter must not be co-located or operating 

in conjunction with any other antenna or transmitter. When operated in 5.15 to 5.25 GHz frequency range, this 

device is restricted to indoor use to reduce the potential for harmful interference with co-channel Mobile 

Satellite Systems.

!

Déclaration sur les limites d'exposition aux radiofréquences :

 

cet équipement est conforme aux limites 

d'exposition aux rayonnements radioélectriques spécifiées par la FCC. Il doit être installé et utilisé à une distance 

minimale de 27 cm par rapport à votre corps pour les fréquences de 2,4 et 5 GHz. Cet émetteur-récepteur ne 

doit pas être utilisé ou situé à proximité d'autres antennes ou émetteurs-récepteurs. En cas d'utilisation dans la 

plage de fréquences de 5,15 à 5,25 GHz, cet appareil doit uniquement être utilisé en intérieur afin de réduire les 

risques d'interférence avec les systèmes satellites mobiles partageant le même canal.

Expected Service Life 10 years. For additional compliance information, refer to the label on the side of this 

device.

!

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void 

the user’s authority to operate this equipment.

Toute modification effectuée sur cet équipement sans l'autorisation expresse de la partie responsable de la 

conformité est susceptible d'annuler son droit d'utilisation.

Summary of Contents for AP-303H Series












Reviews: