Aruba 387 Series Installation Manual Download Page 12

12

Aruba 387 Series Outdoor Access Points

| Installation Guide

Contact Aruba

Copyright

© Copyright 2019 Hewlett Packard Enterprise Development LP

Open Source Code

This product includes code licensed under the GNU General PublicLicense, the GNU Lesser General Public License, and/or
certain other open source licenses.
A complete machine-readable copy of the source code corresponding to such code is available upon request. This offer is valid 

to anyone in receipt of this information and shall expire three years following the date of the final distribution of this product 

version by Hewlett Packard Enterprise Company.
To obtain such source code, send a check or money order in the amount of US $10.00 to:
Hewlett Packard Enterprise Company
Attn: General Counsel
6280 America Center Drive
San Jose, CA 94089
USA

Warranty

This hardware product is protected by an Aruba warranty. For more details, visit 

www.hpe.com/us/en/support.html

Main Site

https://www.arubanetworks.com

Support Site

https://support.arubanetworks.com

Airheads Social Forums and Knowledge Base

https://community.arubanetworks.com/

North America Telephone

1-800-943-4526

1-408-754-1200

International Telephone

https://www

.arubanetworks.com/support-services/contact-support/

Software Licensing Site

https://www

.hpe.com/networking/support

End-of-Life Information

https://www

.arubanetworks.com/support-services/end-of-life/

Security Incident Response Team (SIRT)

https://www

.arubanetworks.com/support-service/security-bulletins/

Email: [email protected]

Summary of Contents for 387 Series













Reviews: