Artus ARTUS-903K, User Manual, Page: 19 / 22

CST. CO., LTD.
18
Chapter 5. Maintenance and Troubleshooting
5.1 Storage conditions
●
Please shutdown the main power switch of the product before cleaning.
●
Please use a dry cloth while cleaning to protect the inside of the product from liquid.
5.2 Treatment and Maintenance
●
Please check the tightness of bolts on a regular basis, at least every six months.
●
Please make sure that the cable is not damaged or torn.
●
Please make sure that the label is not damaged and is kept to identifiable.
5.3 Troubleshooting
If you encounter any of the following problems during use, please do the following.
NO Symptoms Actions
1
The screen of the Hand
Controller does not work.
1. Please check the supplying of power.
2. Please check the connection of the Hand
Controller with device.
2
The touch function does
not respond.(no change/
no sound)
1. Please initialize the Hand Controller.
- Turn on the power again while pressing and
holding both of the [START] and [STOP]
buttons.
- When a screen is displayed, then touch
anywhere on screen.
2. Please check whether Touch Lock function
enabled. Refer to clause 4.2.7.
3
Error code ‘E1’ displayed
The motor is stopped temporary.
- Please check the cable connection between
Hand Controller and Device.
- If the Hand Controller cable is disconnected to
device, please reconnect the cable after power
turn off.
4
Error code ‘E5’ displayed
The current angle is out of programmed range of
exercise.
- Pressing and holding the [START] button for
more
3 seconds, then the device goes into
the programmed range.
The error code will disappeared.
5
Error code ‘E9’ displayed
The emergency stop button on device was pressed.
- When the emergency stop switch is released by
turning clockwise, the error code will disappeared.