CST. CO., LTD.
18
2) Manual
< Fig. 4.2.6 >
● The [Manual] function is used
to adjust exercise range at the stop mode.
● Touch the [Angle] display area(2) while exercise is stopped,
[Manual] is displayed like screen Fig 4.2.6.
● Pressing and holding the [Up arrow] increase current angle, if it is reached at
desired angle, touch [Upper limit] display area(1) to set as [Upper limit] angle.
● Pressing and holding the [Down arrow] decrease current angle, if it is reached at
desired angle, touch [Lower limit] display area(3) to set as [Lower limit] angle.
4.2.8 Locking the touch function
●
It is possible to lock the touch function in order not to change a programmed value by
patient.
● Pressing and holding the [STOP] button for 5 seconds in the stop mode, the [Lock]
function is set with ‘beep’ sound and symbol displaying, above screen shows this.
●
It is available to operate only [START] and [STOP] button.
●
The [Lock] function is disabled
with ‘beep’ sound and symbol di
sappear
ing
by pressing
and holding
the [STOP] button for 5
s
econds
.
Summary of Contents for ARTUS-301A
Page 23: ...CST CO LTD 22 Sep 2017 printed...
