Artus ARTUS-301A, User Manual

Page: 11 / 23

CST. CO., LTD.
10
Chapter 4. Operation

Refer to 2.8 Product configuration.

Please review warning and caution in Chapter 1.

Please check the connection of the power switch (cord) and the hand controller.

Explanation of symbols in the control unit is covered in Chapter 3.
4.1 How to adjust the device according to the Exercise
Dorsiflexion/Plantaflexion Abduction/Adduction
(Locate ankle motor to the right side of device.) (Locate ankle motor to the front of device.)
4.1.2 For Abduction/Adduction of Ankle
(changing device setting to Abduction/adduction from Dorsiflexion/plantaflexion mode)
Step 1. Adjust the angle of the ankle motor by using the ‘Manual’ function of Hand
Controller(refer to clause 5.2.6) before changing the setting of the device to
make it easier to mount and separate the ‘footplate(1)’.
Step 2. Separate the ‘footplate(1)’ from the ankle motor.
Step 3. Pull the ‘rotator fixture(2)’, and turn the ‘ankle motor rotator(3)’
counterclockwise to 90°
until clicking sound appeared and ‘rotator
fixture(2)’ locked.
Step 4. Mount the connecti
on guide under ‘footplate’ like above picture #4 to ankle
motor.