CST. CO., LTD.
11
4.1.3 For Dorsiflexion/Plantaflexion of Ankle
(changing device setting to Dorsiflexion/plantaflexion from Abduction/adduction mode)
※
Proceed in the opposite sequence from the method of clause 4.2.
Step 1. Adjust the angle of the ankle motor by using the ‘Manual’ function of Hand
Controller(refer to clause 5.2.6) before changing the setting of the device to
make it easier to mount and separate the ‘footplate’.
Step 2. Separate the ‘footplate’ from the ankle motor.
Step 3. Pull the ‘rotator fixture’, and turn the ‘ankle motor rotator’ clockwise to 90°
until clicking sound appeared and the
‘rotator fixture(2)’ locked.
Step 4.
Mount the connection guide on the side of the ‘footplate’ to the ankle motor.
4.1.4 Adjustment of the angle of knee
Step 1. Pull the ‘knee angle adjustment fixture(1)’.
Step 2. Lift up or push down the ‘calf support pad(2)’ as needed and fix it.
Warning : Make sure tighten the knob screw to prevent the device from being
loosen during exercise.
Summary of Contents for ARTUS-301A
Page 23: ...CST CO LTD 22 Sep 2017 printed...
