background image

Since the Double Channel configuration has three modes, we have two extra switches,

which allow us to change the working mode. These are positioned right above the Output

Trim knobs, and are very important. Combined, they change the global behavior of the

Double Channel configuration. They are the Stereo Link and the Stereo Mode switches.

The Stereo Link switch is the one right below the two Equalizer On/Off switches. By default,

it is On, which means we are working in Stereo mode.

Below the Stereo Link, we have the Stereo Mode switch. This is another very important

switch. It's where we change the behavior between True Stereo (L/R, which means Left/

Right) or Mid/Side mode (M/S switch position). The Mid/Side mode has been described in

detail in the

"Mid/Side mode" entry [p.24]

in the "V76-Pre OVERVIEW" chapter, so please refer

to that part if you want to clarify something. Bear in mind, though, that it's with this switch

that we change the mode configuration. Possible configurations are as follows:

• Stereo Link On and Stereo Mode at L/R - True Stereo mode
• Stereo Link Off and Stereo Mode at M/S - Mid/Side mode (Stereo Link is

automatically turned Off)

• Stereo Link Off and Stereo Mode at L/R - Dual Mono mode

5.2.4. Some final words

Some final words to mention something very important. Usually, to change values in the

plug-in controls, we click on the corresponding control and drag the mouse up or down. If

the controls are switches, we simply click them to toggle On or Off. If we want finer editing

values, we can use Ctrl+Drag (Cmd+Drag on macOS). Alternatively, we can mouse Right-

Click and Drag. Using this key combination, the values change in a slower way, which allow

us to get more precise values easily.

Double-clicking a control changes it automatically to the default value. This also works with

Alt+Click (Opt+Click on macOS).

And that's it. We just finished describing all the controls you have at your disposal to process

sound in your DAW using the V76-Pre. We hope you'll enjoy the plug-in and the results you

get when using it, as much as we enjoyed making it.

Arturia - User Manual V76-Pre - V76-Pre CONTROL PANEL

35

Summary of Contents for V76-Pre










































Reviews: