manualshive.com logo in svg

Arturia V76-Pre, User Manual, Page: 38 / 41

Share
Download
Arturia V76-Pre User Manual Download Page 38

5.2.3. Output Section

The Output section, like we already said in the Single Channel description, is dominated

by the prominent Glowing Output Level lamp indicators, which here replace the VU meters.

Since this is a Double Channel configuration, we have not one but two "glowing lamps". They

glow in a way resembling the vacuum tubes, and will change color continuously, from green

(lower gain volume), to orange (between reference level and -1dBFS) and bright red when

the signal reaches analog clipping.

Their glowing sensitivity can be controlled by the "Output LED Sensitivity" option in the right-

hand part of the lower toolbar. We can choose between High, Medium, and Low, with High

as the default option.

The lamps are positioned on the top right of the control panel, above the Input Gain controls.

Besides them, the Double Channel Output only has another pair of controls, which are the

Output Trim knobs in the bottom. These knobs control the Output Volume, and the Glowing

Output Level indicator will reflect their action. The range varies between -24dB and +24dB,

with the default value at 0dB (middle position).

V76-Pre Double Channel Preamp and

Output. Notice the Stereo Link and Stereo

Mode switches, right above the Output

Trim controls, and the Glowing Output

Lamps on top

34

Arturia - User Manual V76-Pre - V76-Pre CONTROL PANEL

Summary of Contents for V76-Pre










































Reviews:

No comments