ARTURIA – SPARK CREATIVE DRUM MACHINE – USER’S MANUAL
65
The input connections are: Trig input to trigger the envelope, modulation for
Attack, Decay, Release time and Sustain volume.
The output connections are: The envelope output (It can be connected to any
modulation input, in blue, or to an envelope input, in green), and the End
output, which sends a Trig signal as soon as the envelope ends.
5.7.3.12
The LFO module
The LFO module will let you create a waveform at low frequencies. You can
define the following parameters:
The Shape of the waveform
The Rate at which it will oscillate
The Width in the case of a square waveform
The Delay which is the duration before the LFO becomes active
The Fade In parameter which controls the time it takes for the LFO to reach its
full amount.
You can also activate the Sync function to sync the LFO frequency to the tempo
of Spark.
The Input connections are:
Trig to retrigger the LFO waveform
Amplitude Modulation
Frequency Modulation
Pulse Width Modulation for the square waveform.
