ARTURIA – Matrix-12 V – USER MANUAL
76
They retain their individual Transposition and other settings, but they move
together when a new preset is selected.
The default Multi has all 12 Voices assigned to the same group, so it is necessary
to reassign them. To do this, click on the Group field next to the Voice you want
to change:
The Group menu in Multi mode
There’s only one group available so far, so click “Create New group” at the
bottom of the list. After this there will be two groups available and you can
assign any one of the Voices to either group.
As soon as one of the Voices has been assigned to group 2 it is possible to
select a different Single mode preset for it without affecting the first Voice. In
the picture below this has been done, and Voices 1 and 2 are now
independent.
However, Voice 3 is still assigned to group 1. You can assign it to group 2 if you
like by following the same process.
Selecting a different group for Voice 3
Using this same technique repeatedly it is possible to set up several groups and
use them to combine Voices into a single polyphonic synth. Let’s take another
look at this graphic from the previous section and analyze what’s happening:
